![]() |
Manowar's Hungarian Weapons |
![]() |
Danuvia 39.M on top compare to Danuvia 43.M on bottom |
![]() |
Made by Danuvia Gepgyar, Budapest, 1943-45 Quantity: 8,000-62,000 (sources disagree) Delayed blowback, selective fire Caliber: 9x25mm Mauser Muzzle velocity 455 m/sec Cyclic rate: 700-750 rpm 40-round staggered row foldable/detachable box magazine |
![]() |
952mm [37.5"] overall, 425mm [16.7"] barrel 3.63kg [8 lbs] without the mag, 4.46kg with loaded mag Tangent sight graduated 50-600 meters Shown with stock and magazine folded |

![]() |
Mechanized units found the 39.M too long, so Pal Kiraly and his team, including
Jozsef Kucher and Gyarik, modified it. The design was done in October 1942 and
was approved next year as a 43.Minta.
The 43.M, is essentially the same as the 39.M, but has a folding metal stock.
A pistol grip was added. The ejector was moved from the receiver into the bolt
carrier. Wooden strips are installed on both sides of the metal frame/receiver.
The magazine of the 43.M is canted slightly forward when in the fixed
position as opposed to the straight vertical position of the 39.M magazine, and
the barrel of the 43.M is approximately 75mm [3"] shorter than that of the
39.M. The magazines of the 39.M and 43.M are not interchangeable. The 43.M was
issued with a redesigned sling. In mid-1944 several internal parts were re-designed to simplify manufacturing. The new gun were called 'Sulyzáras' (Weight-lock) 43.M. Existing guns could be easily updated by replacing their bolt assembly. The 43.M was used by the Military, Gendarmerie, Police and the 'Nyilaskeresztes' [ArrowCross] Party troops. The gun stayed in service until the early 1950's when it was gradually replaced by the PPSh41 and Kucher K1 Cartridge dimensions: Case Length: 24.9mm [.980"], Rim Dia.: 9.9mm [.389"], Overall 35mm [1.377"] long, Bullet Wgt: 125gr/8.15g. |
An improved prototype designated as Danuvia 44.M was made based on this machine pistol.
![]() |
This Submachine Gun was issued with a standard 35.M type Sword bayonet. 480mm overall, 340mm long double edged blade. 15mm dia socket sleeve. |