Automatic Rifle Mannlicher Yasnikov M.95 Prototype

Russian Yasnikov's Mannlicher M95/15 Prototype

Early in the 20th century several attempts were made to convert magazine loading bolt action rifle to automatic (sef-loading), In Russia the first attempts were made using their Mosin Nagant M1891 rifles. However an operating mechanism moving the bolt lengthwise, while rotating it proved to be too complicated and impractical.
The designers found that the bolt would require a re-design to eliminate its rotation requirement. This brought into consideration the straight pull action already in existance and widely used by the Austro-Hungarian Monarchy, Bulgaria, Switzerland, Canada and others. These straight pull bolts have internal spiral grooves, which rotate the bolt head into the locked position. This simplified the rquirements of the self loading mechanism. The major parts of the mechanism: Gas chamber attached to the barrel, a gas piston, a return spring and a bolt attachment.
At the start of WW1 in 1914, the Russian Army captured a large number of Austro- Hungarian straight pull Mannlicher rifles in Galicia. The Russian weapon designers had access to plenty of straight pull weapons for experiments. One of these was Tula Master Armorer named Yasnikov (also referred to as Yasinovskiy) who experimented with the M.95 Stutzens.

Mannlicher M.95 Stutzen Rifle originally mady by Steyr, Austria. Altered by Yasnikov, Tula Arsenal, Russia, 1915
Caliber 8x56R M.93 ball
Overall length 1059mm, Barrel length 495mm, Weight 4.3kg (orig. Stutzen 3.6kg)
Muzzle velocity 575 m/s, Max. firing distance 2200m

Yasnikov's 1915 prototype had its gas port 60mm from the muzzle end of the barrel. The external gas chamber and piston was located on the right side of the rifle to allow the rifle sight targeting to stay functional. A Permamnent metal stop was installed into the stock behind the grip to limit the bolt's rearward movement. The force of the compressed coil spring forced to bolt to load the next round.

The M.95 bolt was internally altered, so when the bolthed reached its final locked (rotated) position, it released the firing pin to fire the next round, making the rifle automatic.
A wood sided steel pistol grip was mounted behind the trigger guard. This handle location also protected the user from the fast moving external parts. The front sight was removed to allow the gas chamber to be installed, a new front sight was installed on top of the gas chamber

Alhough the Yasnikov's Mannlicher M95/15 Stutzen was completely functional, it was not considerable for military acceptance. The weight of the Stutzen was increased about 20%, the attachments were too bulky, the side mounted gas piston system made the gun awkward to handle and it caused weight unbalance. The original 5 round magazine was not practical for automatic use. However this design proved the functionality of the basic theory, but showed that modifying existing weapons will not be practical for military use, and weapon engineers must start with their new automatic weapon designs with the operating system as internal part of the design. Mannlicher's brilliant bolt design was reused decades later by many if these new designers.

According to reports, an Italian Luigi Scotti Company worked on a similar alteration of a straight pull rifle to automatic. They arrived to the same conclusion as Yasnikov, that the development of automatic weapons required new approaches by the inventors. It is worth to mention that Ferdinand Ritter von Mannlicher's genious straight-pull bolt design was the basis of the bolts in modern semi- and fully automatic weapons.
Photos by Yuri Yegorov, Russian Weapon Journal.

Note: WW1 Russian captured rifles may carry a Cyrillic P (greek PI) stamp.

Home